In the last few years the environment becomes more watchful, even for us farmers. All agricultural enterprises that exceed 200 animal units must be tested according to regulation of environment. A farm business with 200 animal units and more is classed ?environmentally hazardous activities? and has to make an environmental impact assessment for the business you have today, and the activity after expansion. Before you can construct a building and expand the numbers of animals is a lot of applications to make. I have in this project restricted me to establish a environmental impact assessment and a consultation foundation. To make a environmental impact assessment is the big part of the application. The environmental impact assessment take a lot of time and you need skills for all the rules in the environmental code to be abele to make an environmental impact assessment approved. The environment codes purposes (1 kap 1 § Miljöbalken) is to rule the laws. The purpose of the environment code is to promote sustainable development which will assure a healthy and sound environment for present and future generations. Definitions of a ?environmentally hazardous activities? 9 kap 1§ Miljöbalken) shall mean the discharges of wastewater, solid matter or gas from land, buildings or structures onto land or into water areas or ground water.

In Sweden, detailed development plans (DDPs) go through a screening process to decide whether their implementation could cause significant environmental impact or not. The criteria in the legislation were studied to see if an environmental impact assessment was needed. This study also investigated 26 DDPs from 12 out of 13 of the municipalities in Östergötland and how they meet up to the demands in relevant legislation, for example the rules for Environmental Impact Assessments. Plans that concerned suburban communities and new housing were selected. The environmental issues highlighted in the plan documents were compared to selected topics from the GIS data base 'Östgötakartan' to see if the assessments made by the municipalities were reasonable judged.

Every plan and program decided on by an authority or municipality, where the environmental impact can be considerable, must be environmentally assessed according to Environmental Code, the Planning and Building Act (PBA) and the Regulation on Environmental Impact Assessment.The purpose of this study is to examine the Environmental Impact Assessment (EIA) for The Region Development Plan for the Stockholm Region, RUFS 2010. The plan was approved by at that time the Regional Planning Office (Regionplanekontoret), which procured the process by consultants. RUFS 2010 includes two merged plans ie. a regional Development Plan (RUP) and the Regional Spatial Plan for Stockholm. It was necessary to establish an environmental assessment of RUP, but not for the regional plan.

Every plan and program decided on by an authority or municipality, where the environmental impact can be considerable, must be environmentally assessed according to Environmental Code, the Planning and Building Act (PBA) and the Regulation on Environmental Impact Assessment.The purpose of this study is to examine the Environmental Impact Assessment (EIA) for The Region Development Plan for the Stockholm Region, RUFS 2010. The plan was approved by at that time the Regional Planning Office (Regionplanekontoret), which procured the process by consultants. RUFS 2010 includes two merged plans ie. a regional Development Plan (RUP) and the Regional Spatial Plan for Stockholm. It was necessary to establish an environmental assessment of RUP, but not for the regional plan.

Every plan and program decided on by an authority or municipality, where the environmental impact can be considerable, must be environmentally assessed according to Environmental Code, the Planning and Building Act (PBA) and the Regulation on Environmental Impact Assessment.The purpose of this study is to examine the Environmental Impact Assessment (EIA) for The Region Development Plan for the Stockholm Region, RUFS 2010. The plan was approved by at that time the Regional Planning Office (Regionplanekontoret), which procured the process by consultants. RUFS 2010 includes two merged plans ie. a regional Development Plan (RUP) and the Regional Spatial Plan for Stockholm. It was necessary to establish an environmental assessment of RUP, but not for the regional plan.

Every plan and program decided on by an authority or municipality, where the environmental impact can be considerable, must be environmentally assessed according to Environmental Code, the Planning and Building Act (PBA) and the Regulation on Environmental Impact Assessment.The purpose of this study is to examine the Environmental Impact Assessment (EIA) for The Region Development Plan for the Stockholm Region, RUFS 2010. The plan was approved by at that time the Regional Planning Office (Regionplanekontoret), which procured the process by consultants. RUFS 2010 includes two merged plans ie. a regional Development Plan (RUP) and the Regional Spatial Plan for Stockholm. It was necessary to establish an environmental assessment of RUP, but not for the regional plan.

This paper describes the integration of environmental assessment in Swedish municipality comprehensive planning through a chosen case study. The implementation of a new EGdirective in Swedish law, concerning Assessment of the effects of certain plans and programmes on the environment, should lead to some changes in the way Swedish municipalities' deals with environmental issues in their comprehensive plans. This could later on lead to new preconditions for municipality comprehensive planning. The purpose of this study was to investigate how the planning organisation in the municipality adapts to new regulations for impact assessment of comprehensive plans required by the Planning and Building act. Secondly the purpose was to partly participate in the early stages of the planning process and thereby indicate and identify possible environmental impacts regarding the aspects of land and water. This was done as a case study in a well defined part of the process.

The Swedish building and property management sector are responsible for about 30 % of the total energy use. In order to take environmental consideration, different environmental assessment tools and standards are used. Miljo?byggnad, Svanen, FEBY12 and PHI are some of these. There has been increased interest to certify buildings and therefore it is of interest to evaluate the assessment of the energy field to see if relevant energy aspects are assessed.

The Swedish building and property management sector are responsible for about 30 % of the total energy use. In order to take environmental consideration, different environmental assessment tools and standards are used. Miljo?byggnad, Svanen, FEBY12 and PHI are some of these. There has been increased interest to certify buildings and therefore it is of interest to evaluate the assessment of the energy field to see if relevant energy aspects are assessed.

The aim of this research is to find out what environmental impact a wave power park has on the Swedish west coast by creating a consultation paper (?Samrådsunderlag?) for the Lysekilproject at Uppsala University. To highlight the complexity of the problem a system analytic approach was used and illustrated by a Causal Loop Diagram.The overall assessment of the Lysekilprojects wave power park at the Swedish west coast is that it will have a low impact on the environment. This is due to the relative small size of the wave power park and some technical solutions made with the environmental aspect in mind. Artificial reefs and a sanctuary for marine species are effects created by the wave power park and in the longer term the impact will give access to an untapped source of renewable energy, wave energy.

This paper is about how transport companies in the future will be able to adapt their activity to an environmentally sustainable development without the effect of negative company economic consequences. Today, the environmental threat is a global problem and knowledge about that effluent of carbon dioxide have a negative impact on the climate is generally known. A transport system that works well is important for Sweden, but the sector has a negative impact on the environment. Regulation and legislation for increased environmental requirements often meets resistance and fear that the work will be hampered by increased costs for environmental work that can lead to an international decrease in competitiveness. The transport companies have outside pressure from the society to do something about the environmental issue, however the companies? customers are not ready to pay a higher price for environmental work.

As a small and land scarce country, effective waste management is ofoutmost importance in Singapore. In this study the production of biogasthrough anaerobic digestion from the organic fraction of municipal solidwaste (OFMSW) was compared to incineration of the waste. At the momentalmost all of the OFMSW in Singapore is incinerated. Three differentscenarios were compared to the reference scenario (incineration): one with alarge scale biogas plant that can treat half of all OFMSW in Singapore, onewith a medium scale biogas plant about 15 times smaller than the large oneand one with a small scale biogas plant that can treat waste from e.g. ashopping center or a food center.By using life cycle assessment (LCA) the different scenarios were comparedin terms of global warming potential (GWP), acidification, eutrophication,energy use and land use.

The environmental debate is more intensive than ever before and the demands on companies increase. There are a number of methods to make it easier for the companies to fulfil the demands. Life Cycle Assessment (LCA) end ecodesign are some of the methods that can be used. Syntronic AB has the possibility to reduce the products´ environmental impact in the design phase. Therefore it is important for the company to make it possible to visualize the negative environmental impacts a product can cause in an easy way. It is also important to visualize for there clients if any improvement is possible. The purpose of this thesis is to develop a simplified model.

The demand for environmental assessments on buildings and energy consumption is increasing as well as the energy performance requirements for buildings. At the same time it is increasingly common with self-producers of heat and electricity generation.The main purpose with this master thesis is to investigate how time resolution affects the environmental assessment of energy consumption in office buildings connected to district heating (DH). Environmental assessments were done with both attributional LCA and consequential LCA with system expansion.Fortum´s DH system in Stockholm was analyzed and district heating production was simulated in a Matlab-model. Greenhouse gas (GHG) emissions for the production were calculated. The heat demand of the office Gångaren 16 in Stockholm was simulated in IDA ICE.

The environmental debate is more intensive than ever before and the demands on companies increase. There are a number of methods to make it easier for the companies to fulfil the demands. Life Cycle Assessment (LCA) end ecodesign are some of the methods that can be used. Syntronic AB has the possibility to reduce the products´ environmental impact in the design phase. Therefore it is important for the company to make it possible to visualize the negative environmental impacts a product can cause in an easy way. It is also important to visualize for there clients if any improvement is possible. The purpose of this thesis is to develop a simplified model.